Skate Brake Replacement
When replacing the brake on your inline skate it is important to remember that you do so before it becomes a problem. The best way to do this is to inspect the brake of your skate prior to skating each time. If you there is strong visible wear, you will want to replace it. Additionally, if you are experiencing difficulty stopping, this is also a sign that your brake may need replacement. You may also note that you brake has a wear-line on it. If your brake has whittled down to this line, go ahead and replace it.
Not all brakes are replaced the same way, but you will need a Phillips-head screwdriver to complete the replacement. Here are the two most common methods of brake replacement:
Method 1 – Vertical Brake Attachment
Step 1: Take your skate and turn it over. You will see a hole in the bottom of the brake that houses the screw.
Step 2: Take your Phillips-head screwdriver and remove the screw to allow the brake to come free. Remove the brake and position the new brake in its place.
Step 3: Replace the screw in the new brake and fasten it to the skate.
Once the brake is fastened in place, you are finished. Here are some visuals to explain the process that I just described:
Method 2 – Horizontal Brake Attachment
Step 1: Take your skate and turn it over. If you do not see a screw attachment in the bottom of the brake, the brake is likely positioned horizontally at the top of the brake.
Step 2: Take your Phillips-head screwdriver and remove the screw to allow the brake to come free. Remove the brake and position the new brake it is place.
Step 3: Replace the screw in the brake and fasten it to the skate.
Once the brake is fastened in place, you are finished. Here is a visual to explain the positioning of the screw on a horizontal brake attachment:
Tags: Articles, Inline Skates, Skate Brakes, Skating Safety
I need the housing that holds the brake in place the housing my grandson had on his skate wore down to nothing is it replacable. He has blade runner K2
William,
Blade Runner and K2 are 2 different companies. If you can tell me the specific brand and model, I will see if I can get one for you.
Thanks!
- Steve
Could you help me find 2 adult Solomon brake pads? Thank you.
I am looking for brake hardware for the Roces LAX, I have seen the brake “pad” for sale but haven’t been able to find the hardware(housing?) that holds the brake. Thanks
Angela,
Your best bet would be to contact Roces directly and seeing if they can sell you the brake housing, The actual housing typically is not stocked by a dealer or any 2nd party shop. We were unable to find a contact number for the US but here is a link to their site which you can submit a request where you can ask if they have the piece you are looking for.
Hope this helps and you can get out there skating soon!
Thanks,
Chris Gorski
I have a pair of X-trainer AutoFit Salomon Rollerblades. Someone just
returned them to me with one brake missing. Where may I purchase
a replacement?
Thank you!
Joe,
Salomon has unfortunately been out of the inline skate business for a few years and it is very difficult to find parts for them. The best way I have found to find actual Salomon parts would be e-bay or similar sites. I tried contacting Salomon roughly a year ago for another customer and they did not have any stock in replacement parts and have focused on other endeavors.
Thanks,
Chris Gorski
I bought a pair of used Salomon skates which only have brakes on one skate. Is this OK ? Shouldn’t there be brakes on both skates ?
The brake pad is good but the brake pad housing is broken. I know Salomon is out of business for skates, but aren’t these housings standard ? Could I purchase a brake pad housing from a different brand ?
Thank you,
Miki
Miki,
Inline skates typically only have a brake on one skate and can be found on the right skate. Unfortunately as Salomon no longer manufactures inline skates finding parts can be tough, although for a brake you are in luck. Another company, Powerslide, manufactures a universal brake assembly for inline skates. This assembly fits most all brand skates; it comes in an 84mm size and 100mm size. The size refers to the maximum size wheel in millimeters that the brake can be used with.
Thanks,
Chris Gorski
I enjoy the site
Hey there.
I’ve been scouring the internet for a replacement brake pad for Roller Derby Super Sport 900 inline skates (SS-900). I haven’t been able to find any, and I was wondering if you could somehow manage to help me out. I tried contacting Roller Derby weeks ago, but have not received a response. I rather not use stops that will compromise the longevity of my wheels. I thought that maybe using a brake pad from a different company might work, only I’m not sure which ones will fit it properly. Any ideas?
Annie,
It is possible to get a new brake from Roller Derby but you would have to order it directly from them.
I recently purchased a pair of Bladerunner Fury aggressive inline skates. I'm a complete amateur and didn't know what I was ordering. I didn't realize they didn't come with brakes. yep, so just wondering if its possible to install brakes on these skates. been doing a lot of research online and nothing seems to come up. any suggestions?
Hey Jeff,
With aggressive skates, since they are designed to be used in park and pipe situations, are not manufactured with brakes or to be able to use them. Due to the typical wheel size of aggressive skates and the fact that brakes typically just get in the way when trying to grind or pull other tricks, brakes are currently unavailable for the Fury. My suggestion would be to take a look at a more traditional inline skate or look a learning to brake without a brake on your skates. Hope this helps!
Regards,
Dru